The Best Power Stations for CPAP
A CPAP needs little power but needs it all night, every night. These stations cover one night to a week.
The Anker SOLIX C1000 Gen 2 is the best power station for a CPAP, running a 40-watt machine for about two and a half 8-hour nights with a 10ms UPS; the EcoFlow River 3 Plus covers about one night for much less, and the EcoFlow Delta 3 Plus can expand to cover a week or more.
Our picks
Anker SOLIX C1000 Gen 2
About 22 hours at 40 watts, a 10ms UPS so therapy doesn't stop when the grid drops, and a 49-minute recharge.
- Price
- About $550
- Capacity
- 1,024Wh
- Output
- 2,000W, 120V
- Recharge
- 49 min (1,600W)
- Weight
- 24.9 lb
EcoFlow River 3 Plus
About 6 hours at 40 watts, a full night on machines that draw less with the humidifier off. Under-10ms UPS.
- Price
- About $220
- Capacity
- 286Wh
- Output
- 600W, 120V
- Recharge
- About 1 hr (380W)
- Weight
- 10.4 lb
Jackery Explorer 300 Plus
8.3 pounds and quiet. Same capacity as the River, one AC outlet.
- Price
- About $200
- Capacity
- 288Wh
- Output
- 300W, 120V
- Recharge
- About 2 hrs
- Weight
- 8.3 lb
EcoFlow Delta 3 Plus
1kWh to start, up to 5kWh with extra batteries.
- Price
- About $700
- Capacity
- 1,024Wh
- Output
- 1,800W, 120V
- Recharge
- 56 min (1,500W)
- Weight
- 27.6 lb
Side by side
| Station | Capacity | Output | UPS | Weight | Price |
|---|---|---|---|---|---|
| Anker SOLIX C1000 Gen 2 | 1,024Wh | 2,000W | 10ms | 24.9 lb | About $550 |
| EcoFlow River 3 Plus | 286Wh | 600W | Under 10ms | 10.4 lb | About $220 |
| Jackery Explorer 300 Plus | 288Wh | 300W | Not advertised | 8.3 lb | About $200 |
| EcoFlow Delta 3 Plus | 1,024Wh | 1,800W | Under 10ms | 27.6 lb | About $700 |
CPAP runtimes
CPAP power draw depends on the machine, the pressure setting and above all the heated humidifier and heated tube, which can use more than the blower. These are estimates for an 8-hour night; check your machine's power supply rating and the maker's battery guide. We use 40 watts as a cautious figure; many current machines use less with the humidifier off.
| Station | No humidifier (about 40W) | With humidifier (about 80W) |
|---|---|---|
| Jackery Explorer 300 Plus | 6 hrs (0.8 nights) | 3 hrs (0.4 nights) |
| EcoFlow River 3 Plus | 6 hrs (0.8 nights) | 3 hrs (0.4 nights) |
| Anker SOLIX C1000 Gen 2 | 22 hrs (2.7 nights) | 11 hrs (1.4 nights) |
| EcoFlow Delta 3 Plus | 22 hrs (2.7 nights) | 11 hrs (1.4 nights) |
| Bluetti Elite 200 V2 | 44 hrs (5.5 nights) | 22 hrs (2.8 nights) |
Use the DC adapter if you can
ResMed and Philips sell DC power cords for many of their machines that plug into a 12V or 24V socket. Running the CPAP on DC skips the AC inverter, which wastes power even at light loads, and can stretch runtime by 10 to 30%. Turn off the humidifier and heated tube for outage nights if your doctor agrees. See how long a power station runs a CPAP.
Questions
How long will a power station run a CPAP?
Divide the station's watt-hours by about 1.2 times your CPAP's draw. A 300Wh station runs a 40-watt CPAP about 6 hours; a 1kWh station about 22 hours.
Is a power station safe for a CPAP?
Yes. Every station here has a pure sine wave inverter, which is what CPAP makers recommend. Keep the station on the floor with its vents clear.
Can I take a power station on a plane for my CPAP?
Not these. The FAA limits lithium batteries on passenger flights to 160Wh, and needs airline approval above 100Wh. Use a CPAP-maker travel battery. See flying with a power station.