Independent reviews of portable power stations and solar generators, sized by what you need to runHow we make money
Guide

How to Connect a Power Station to Your House

There's a safe way and a dangerous way. The safe way needs an electrician once.

To connect a power station to your house safely, have an electrician install a generator inlet with an interlock kit or a transfer switch, then plug the station's L14-30 (240V) or TT-30 (120V) outlet into the inlet with the matching cord, and never backfeed through a wall outlet.

Updated November 18, 2026 · By the editors of The Power Station Report · We earn from qualifying purchases

Your options

Extension cords

No installation. Run cords from the station to the fridge, freezer, router and lamps. Can't power hardwired loads.

Generator inlet and interlock

An electrician mounts an inlet box outside or in the garage and adds an interlock to your main panel, which physically prevents the main breaker and the generator breaker from being on at once. You choose which circuits to run by flipping breakers. Usually the least expensive wired option.

Manual transfer switch

A small sub-panel next to your main panel with switches for six to ten chosen circuits. Easy to use; you pick the circuits ahead of time.

Brand smart panels

EcoFlow's Smart Home Panel and Anker's home power panel switch automatically, monitor circuits in an app and integrate with their batteries and solar. They cost more and work only with that brand.

Never backfeed

Never plug a power station or generator into a wall outlet with a double-male ("suicide") cord. It backfeeds the grid, which can electrocute utility workers, and it bypasses your breakers.

Matching the outlet

Inlets come in 120V TT-30 or L5-30 and 120/240V L14-30 versions. The EcoFlow Delta Pro 3 and Anker F3800 Plus have L14-30 outlets for 240V. A 120V-only station like the Jackery HomePower 3000 can feed one leg of a 120V inlet, so it can't run 240V circuits.

Picking circuits

Start with the fridge, freezer, furnace blower or gas boiler controls, well pump if you have one, sump pump, router and a few lights and outlets. Skip electric water heaters, dryers, ranges and central AC unless you have a very large system.

Questions

Can I plug a power station into my house?

Only through an inlet with an interlock or a transfer switch, installed by an electrician.

Do I need a permit?

Usually, yes. Your electrician will know your local rules.

Can a power station run my furnace?

A gas furnace's blower and controls, yes, through a transfer switch. An electric furnace or heat pump needs far too much power.

Keep reading